Skip to main content

Indkøbskurv

Du får VIP-behandling!

Vare(r) ikke tilgængelig til køb
Gennemgå din indkøbskurv. Du kan fjerne de(n) tilgængelige vare(r) nu, ellers fjerner vi det automatisk ved kassen.
varervare
varervare

Anbefalet til dig

Loading...

Mekanik e-bøger

Hvis du kan lide Mekanik e-bøger, så vil du elske disse fremragende valg.
Viser 1 - 24 af 4308 resultater
Skip side bar filters
  • Quantum Mechanics: The Theoretical Minimum

    'Quantum mechanics for real. This is the good stuff, the most mysterious aspects of how reality works, set out with crystalline clarity. The place to start' Sean Carroll, physicist, California Institute of Technology, author of The Particle at the End of the UniverseThis is the ultimate practical introduction to quantum mechanics. World-renowned physicist Leonard Susskind and data engineer Art ... Læs mere

    86,02 kr.

  • Flying Blind

    The 737 MAX Tragedy and the Fall of Boeing

    af Peter Robison ...
    'The astoundingly well reported and beautifully told story of the downfall of what was once a great American company. A must-read' Bethany McLean, bestselling author of The Smartest Guys in the Room'Compelling and richly reported, Flying Blind is about so much more than the sad decline of Boeing and the tragic mistakes that led to the 737 Max disaster. It's also the urgent story of how the ... Læs mere

    111,85 kr.

  • The God Equation

    The Quest for a Theory of Everything

    af Michio Kaku ...
    'A majestic story' David Bodanis, Financial TimesFrom the international bestselling author of Physics of the Impossible and Physics of the FutureThis is the story of a quest: to find a Theory of Everything. Einstein dedicated his life to seeking this elusive Holy Grail, a single, revolutionary 'god equation' which would tie all the forces in the universe together, yet never found it. Some of the ... Læs mere

    111,85 kr.

  • Quantum Strangeness

    Wrestling with Bell's Theorem and the Ultimate Nature of Reality

    A physicist's efforts to understand the enigma that is quantum mechanics."One of the finest books I have read on quantum mechanics: lucid and careful, but also entertaining, honest, and generous."—Phillip Ball, author of Beyond WeirdAstrophysicist George Greenstein has been both fascinated and confused by quantum mechanics for his entire career. In this book, he describes, engagingly and ... Læs mere

    149,99 kr.

  • 507 Mechanical Movements

    Mechanisms and Devices

    Over five hundred mechanisms and devices from the first century of the Industrial Revolution. Starting from simple pulleys and levers, this clazzic book works its way through basic engineering principles to Otis’s elevator safety stop, Colt’s revolver action, and Ferguson’s mechanical paradox (Why is it a paradox? Buy the book and find out!) Each mechanism is illustrated with a clear diagram, and ... Læs mere

    23,97 kr.

  • A Map of the Invisible

    Journeys into Particle Physics

    A SUNDAY TIMES BOOK OF THE YEAR'A magnificent, compelling and insightful voyage to the frontier of knowledge from a great writer with a deep understanding.' Brian CoxWhat is the universe really made of? How do we know? Follow the map of the invisible to find out...Over the last sixty years, scientists around the world have worked together to explore the fundamental constituents of matter, and the ... Læs mere

    94,63 kr.

  • Five of Maxwell's Papers

    When observing the spectrum formed by looking at a long vertical slit through a simple prism, I noticed an elongated dark spot running up and down in the blue, and following the motion of the eye as it moved up and down the spectrum, but refusing to pass out of the blue into the other colours. It was plain that the spot belonged both to the eye and to the blue part of the spectrum. ... Læs mere

    15,96 kr. eller Gratis med Kobo Plus

  • Dreams Of A Final Theory

    The Search for The Fundamental Laws of Nature

    An understanding of nature's final laws may be within our grasp - a way of explaining forces and symmetries and articles that does not require further explanation. 'This starting point, to which all explanations can be traced, is what I mean by a final theory', says Steven Weinberg in this extraordinary book. In it he discusses beauty, the weakness of philosophy, the best ideas in physics and the ... Læs mere

    137,68 kr.

  • Stratification, Rollover and Handling of LNG, LPG and Other Cryogenic Liquid Mixtures

    Serier serie Energy (R0)
    This short, practical book offers advice on the safe storage, handling and transportation of liquid natural gas (LNG), liquid petroleum gas (LPG) and other cryogenic fluid mixtures. It begins with a review of the physical properties of LNG and LPG, and a brief overview of basic handling and storage methods. The chapters that follow address more in-depth topics such as heat flows in LNG and LPG ... Læs mere

    700,49 kr.

  • Storm in a Teacup

    The Physics of Everyday Life

    af Helen Czerski ...
    'A quite delightful book on the joys, and universality, of physics. Czerski's enthusiasm is infectious because she brings our humdrum everyday world to life, showing us that it is just as fascinating as anything that can be seen by the Hubble Telescope or created at the Large Hadron Collider.' - Jim Al-KhaliliOur world is full of patterns. If you pour milk into your tea and give it a stir, you'll ... Læs mere

    94,63 kr.

  • Newtonian Dynamics

    An Introduction

    This textbook provides a comprehensive review of Newtonian dynamics at a level suitable for undergraduate physics students. It demonstrates that Newton’s three laws of motion, combined with a few simple force laws, not only can describe the motions of everyday objects observed on the surface of the Earth, but can also account for the motions of celestial objects seen in the sky. It helps bridge ... Læs mere

    559,56 kr.

  • Reactive Bubbly Flows

    Final Report of the DFG Priority Program 1740

    Serier serie Engineering (R0)
    This book presents experimental and numerical methods that have been developed during six years of targeted research within the DFG priority program SPP 1740, elucidating the interaction between hydrodynamics, mass transfer and transport as well as chemical reactions in bubbly flows. A special feature of this book is its focus on an interdisciplinary research approach with contributions from ... Læs mere

    1.868,14 kr.

  • Optimization Methods in Structural Design

    af Alan Rothwell ...
    Serier serie Engineering (R0)
    This book offers an introduction to numerical optimization methods in structural design. Employing a readily accessible and compact format, the book presents an overview of optimization methods, and equips readers to properly set up optimization problems and interpret the results. A ‘how-to-do-it’ approach is followed throughout, with less emphasis at this stage on mathematical derivations. The ... Læs mere

    747,20 kr.

  • Sloshing in Upright Circular Containers

    Theory, Analytical Solutions, and Applications

    Serier serie Mathematics and its Applications
    This book presents mathematical fundaments and results on sloshing in an upright circular cylindrical tank with semi-analytical solutions. The book outlines generic mathematical and physical aspects of the multimodal method, describes milestones, and presents several versions of modal systems for an upright circular tank, both linear and nonlinear.The book offers an extended description of the ... Læs mere

    645,66 kr.

  • Mechanics of Metamaterials with Negative Parameters

    Serier serie Chemistry and Material Science (R0)
    This book discusses bulk solids that derive their mechanical properties not from those of their base materials, but from their designed microstructures. Focusing on the negative mechanical properties, it addresses topics that reveal the counter-intuitive nature of solids, specifically the negativity of properties that are commonly positive, such as negative bulk modulus, negative compressibility, ... Læs mere

    1.027,44 kr.

  • Industrial Applications of Adhesives

    1st International Conference on Industrial Applications of Adhesives

    Serier serie Springer Nature Proceedings excluding Computer Science
    This book gathers selected papers presented at the 1st International Conference on Industrial Applications of Adhesives 2020 (IAA 2020). It covers a wide range of topics, including adhesive curing for electronic and automotive industries; adhesive testing with a torsion machine for rigorous mechanical properties determination; joint design using innovative techniques such as the meshless method; ... Læs mere

    934,02 kr.

  • Asymptotic Analysis of Spatial Problems in Elasticity

    Serier serie Engineering (R0)
    The book presents homogeneous solutions in static and dynamical problems of anisotropic theory of elasticity, which are constructed for a hollow cylinder. It also offers an asymptotic process for finding frequencies of natural vibrations of a hollow cylinder, and establishes a qualitative study of several applied theories of the boundaries of applicability.Further the authors develop a general ... Læs mere

    840,61 kr.

  • Flow through Heterogeneous Geologic Media

    This textbook integrates classic principles of flow through porous media with recently developed stochastic analyses to provide new insight on subsurface hydrology. Importantly, each of the authors has extensive experience in both academia and the world of applied groundwater hydrology. The book not only presents theories but also emphasizes their underlying assumptions, limitations, and the ... Læs mere

    938,07 kr.

  • Injection Molding

    Integration of Theory and Modeling Methods

    Serier serie Engineering (R0)
    This book covers fundamental principles and numerical methods relevant to the modeling of the injection molding process. As injection molding processing is related to rheology, mechanical and chemical engineering, polymer science and computational methods, and is a rapidly growing field, the book provides a multidisciplinary and comprehensive introduction to the subjects required for an ... Læs mere

    840,61 kr.

  • Dynamics of the Axially Moving Orthotropic Web

    Serier serie Engineering (R0)
    A material continuum moving axially at high speed can be met in numerous different technical applications. These comprise band saws, web papers during manufacturing, processing and printing processes, textile bands during manufacturing and processing, pipes transporting fluids, transmission belts as well as flat objects moving at high speeds in space. In all these so varied technical applications, ... Læs mere

    840,61 kr.

  • Applications of Computational Tools in Biosciences and Medical Engineering

    Redigeret af Holm Altenbach, Andreas Öchsner ...
    Serier serie Engineering (R0)
    This monograph presents the latest developments and applications of computational tools related to the biosciences and medical engineering. Computational tools such as the finite element methods, computer-aided design and optimization as well as visualization techniques such as computed axial tomography open completely new research fields with a closer joining of the engineering and bio/medical ... Læs mere

    840,61 kr.

  • Air Pollution and Turbulence

    Modeling and Applications

    Redigeret af Davidson Moreira, Marco Vilhena ...
    Since its discovery in early 1900, turbulence has been an interesting and complex area of study. Written by international experts, Air Pollution and Turbulence: Modeling and Applications presents advanced techniques for modeling turbulence, with a special focus on air pollution applications, including pollutant dispersion and inverse problems. The ... Læs mere

    785,57 kr.

  • Advanced Structural Safety Studies

    With Extreme Conditions and Accidents

    af Jeom Kee Paik ...
    Serier serie Engineering (R0)
    This book describes principles, industry practices and evolutionary methodologies for advanced safety studies, which are helpful in effectively managing volatile, uncertain, complex, and ambiguous (VUCA) environments within the framework of quantitative risk assessment and management and associated with the safety and resilience of structures and infrastructures with tolerance against various ... Læs mere

    466,97 kr.

  • Encyclopedia Of Two-phase Heat Transfer And Flow Iv: Modeling Methodologies, Boiling Of Co2, And Micro-two-phase Cooling (A 4-volume Set)

    af John R Thome ...
    Set IV is a new addition to the previous Sets I, II and III. It contains 23 invited chapters from international specialists on the topics of numerical modeling of pulsating heat pipes and of slug flows with evaporation; lattice Boltzmann modeling of pool boiling; fundamentals of boiling in microchannels and microfin tubes, CO2 and nanofluids; testing and modeling of micro-two-phase cooling systems ... Læs mere

    8.979,85 kr.