This is our Philippines store.

Looks like you're in United States. You need a Philippines address to shop on our Philippines store. Go to our United States store to continue.

Showing results for "dechun lu"

  • Bestsellers
  • Highest Rated
  • Price: Low to High
  • Title: A to Z
  • Title: Z to A
  • Date: Newest to Oldest
  • Date: Oldest to Newest
Clear All

Showing 1 - 2 of 2 Results

Adult content is visible. 

2025

EN

This book primarily introduces innovative multi-physical plastic modeling for geomaterials in unsteady environments and advanced numerical methods for elastoplastic models, topics not systematically covered in other literature. The constitutive models in the form of stress-strain-environment will be interesting to students and researchers in geotechnical engineering and rock and soil mechanics. The book provides a thorough exploration of modeling techniques and algorithmic flowcharts, faci...

PricePHP10,935.99

2024

EN

This open access book. This book primarily introduces the dynamic analysis of typical offshore wind turbines foundations in soft clays under marine environmental loads. The dynamic behaviors and bearing performance of offshore wind turbines foundations will be interesting to students and researchers in offshore geotechnical engineering. This book systematically elaborates on numerical analysis methods and dynamic response laws of offshore wind turbine foundations using the calculation flow...

PriceFree

People who read this also enjoyed

Semiconductor Nanomaterials for Flexible Technologies

From Photovoltaics and Electronics to Sensors and Energy Storage

2010

EN

This book is an overview of the strategies to generate high-quality films of one-dimensional semiconductor nanostructures on flexible substrates (e.g., plastics) and the use of them as building blocks to fabricating flexible devices (including electronics, optoelectronics, sensors, power systems). In addition to engineering aspects, the physics and chemistry behind the fabrication and device operation will also be discussed as well. Internationally recognized scientists from academia, nati...

PricePHP10,409.89

2013

EN

Frontiers in Electronics is divided into four sections: advanced terahertz and photonics devices; silicon and germanium on insulator and advanced CMOS and MOSHFETs; nanomaterials and nanodevices; and wide band gap technology for high power and UV photonics. This book will be useful for nano-microelectronics scientists, engineers, and visionary research leaders. It is also recommended to graduate students working at the frontiers of the nanoelectronics and microscience.

PricePHP2,484.69

Battery Technology

From Fundamentals to Thermal Behavior and Management

2023

EN

Battery Technology: From Fundamentals to Thermal Behavior and Management provides comprehensive coverage of rechargeable battery technology fundamentals, along with relevant aging mechanisms and thermal management systems. With a strong focus on the analysis and modeling of battery technologies, the book includes coverage of overpotentials in battery cells and discussions on the thermal-electrochemical coupled modeling of batteries. Beginning with an introduction to battery technology, the...

PricePHP7,806.99

2020

EN

Laser cladding is an additive manufacturing technology capable of producing coatings due to the surface fusion of metals. The selected powder is fed into a focused laser beam to be melted and deposited as coating. This allows to apply material in a selected way onto those required sections of complex components. The process main properties are the production of a perfect metallurgically bonded and fully dense coatings; the minimal heat affected zone and low dilution between the substrate a...

PricePHP7,719.39

Mechanics of Structures and Materials XXIV

Proceedings of the 24th Australian Conference on the Mechanics of Structures and Materials (ACMSM24, Perth, Australia, 6-9 December 2016)

2019

EN

Mechanics of Structures and Materials: Advancements and Challenges is a collection of peer-reviewed papers presented at the 24th Australasian Conference on the Mechanics of Structures and Materials (ACMSM24, Curtin University, Perth, Western Australia, 6-9 December 2016). The contributions from academics, researchers and practising engineers from Australasian, Asia-pacific region and around the world, cover a wide range of topics, including:Structural mechani...

PricePHP36,077.70

Solid-Liquid Thermal Energy Storage

Modeling and Applications

2022

EN

Solid–Liquid Thermal Energy Storage: Modeling and Applications provides a comprehensive overview of solid–liquid phase change thermal storage. Chapters are written by specialists from both academia and industry. Using recent studies on the improvement, modeling, and new applications of these systems, the book discusses innovative solutions for any potential drawbacks.This book:Discusses experimental studies in the field of solid–liquid phas...

PricePHP5,207.11

2024

EN

Nanostructured Materials Engineering and Characterization for Battery Applications is designed to help solve fundamental and applied problems in the field of energy storage. Broken up into four separate sections, the book begins with a discussion of the fundamental electrochemical concepts in the field of energy storage. Other sections look at battery materials engineering such as cathodes, electrolytes, separators and anodes and review various battery characterization methods and their ap...

PricePHP13,012.29

2026

EN

This book presents original, peer-reviewed research papers from the 2025 5th International Symposium on Insulation and Discharge Computation for Power Equipment (IDCOMPU2025), held in Harbin, China. The topics covered include, but are not limited to, insulation technologies, discharge computation methods, electric power equipment, and electrical materials. These papers showcase the latest advancements in the field of insulation and discharge analysis for power equipment, making the book a ...

PricePHP19,235.59

Physics and Mechanics of New Materials and Their Applications

Proceedings of the International Conference PHENMA 2024


2025

EN

The book provides new results of internationally recognized scientific teams in the fields of Materials Science, Physics, Mechanics, Fabrication Techniques and Technologies of Advanced Materials, operating in wide scaling from nanometer to macroscopic range. The developed theoretical and experiment approaches cover prospective manufacture methods of nanomaterials, ferroelectrics, piezoelectrics (environmentally friendly) and other advanced materials and composites. The book discusses fabri...

PricePHP15,375.69

Green Sustainable Process for Chemical and Environmental Engineering and Science

Solid-State Energy Storage - A Path to Environmental Sustainability

2022

EN

Green Sustainable Process for Chemical and Environmental Engineering and Science: Solid-State Energy Storage - A Path to Environmental Sustainability offers an in-depth analysis of the synthesis methods, manufacturing techniques and underlying mechanisms of ionic and electronic-ion transport in various single phase and multi-phase components for electric power storage, such as lithium and sodium ion batteries, sulfur batteries, and lithium-metal electrochemical systems. Though solid-state ...

PricePHP10,870.99