This book primarily introduces innovative multi-physical plastic modeling for geomaterials in unsteady environments and advanced numerical methods for elastoplastic models, topics not systematically covered in other literature. The constitutive models in the form of stress-strain-environment will be interesting to students and researchers in geotechnical engineering and rock and soil mechanics. The book provides a thorough exploration of modeling techniques and algorithmic flowcharts, faci...

This open access book. This book primarily introduces the dynamic analysis of typical offshore wind turbines foundations in soft clays under marine environmental loads. The dynamic behaviors and bearing performance of offshore wind turbines foundations will be interesting to students and researchers in offshore geotechnical engineering. This book systematically elaborates on numerical analysis methods and dynamic response laws of offshore wind turbine foundations using the calculation flow...

This book is an overview of the strategies to generate high-quality films of one-dimensional semiconductor nanostructures on flexible substrates (e.g., plastics) and the use of them as building blocks to fabricating flexible devices (including electronics, optoelectronics, sensors, power systems). In addition to engineering aspects, the physics and chemistry behind the fabrication and device operation will also be discussed as well. Internationally recognized scientists from academia, nati...

Frontiers in Electronics is divided into four sections: advanced terahertz and photonics devices; silicon and germanium on insulator and advanced CMOS and MOSHFETs; nanomaterials and nanodevices; and wide band gap technology for high power and UV photonics. This book will be useful for nano-microelectronics scientists, engineers, and visionary research leaders. It is also recommended to graduate students working at the frontiers of the nanoelectronics and microscience.

Battery Technology: From Fundamentals to Thermal Behavior and Management provides comprehensive coverage of rechargeable battery technology fundamentals, along with relevant aging mechanisms and thermal management systems. With a strong focus on the analysis and modeling of battery technologies, the book includes coverage of overpotentials in battery cells and discussions on the thermal-electrochemical coupled modeling of batteries. Beginning with an introduction to battery technology, the...

Laser cladding is an additive manufacturing technology capable of producing coatings due to the surface fusion of metals. The selected powder is fed into a focused laser beam to be melted and deposited as coating. This allows to apply material in a selected way onto those required sections of complex components. The process main properties are the production of a perfect metallurgically bonded and fully dense coatings; the minimal heat affected zone and low dilution between the substrate a...

Laser-Based Additive ManufacturingExplore laser-based additive manufacturing processes via multi-scale modeling and computer simulationIn Laser-Based Additive Manufacturing: Modeling, Simulation, and Experiments, a distinguished team of researchers delivers an incisive framework for understanding materials processing using laser-based additive manufacturing (LAM). The book describes the use of computational modeling and simulation ...

Combining both fundamental principles and real-life applications in a single volume, this book discusses the latest research results in ferroelectrics, including many new ferroelectric materials for the latest technologies, such as capacitors, transducers and memories.The first two chapters introduce dielectrics and microscopic materials properties, while the following chapter discusses pyroelectricity and piezoelectricity. The larger part of the text is devoted to ferroelectricity ...

Mechanics of Structures and Materials: Advancements and Challenges is a collection of peer-reviewed papers presented at the 24th Australasian Conference on the Mechanics of Structures and Materials (ACMSM24, Curtin University, Perth, Western Australia, 6-9 December 2016). The contributions from academics, researchers and practising engineers from Australasian, Asia-pacific region and around the world, cover a wide range of topics, including:Structural mechani...

Solid–Liquid Thermal Energy Storage: Modeling and Applications provides a comprehensive overview of solid–liquid phase change thermal storage. Chapters are written by specialists from both academia and industry. Using recent studies on the improvement, modeling, and new applications of these systems, the book discusses innovative solutions for any potential drawbacks.This book:Discusses experimental studies in the field of solid–liquid phas...

Nanostructured Materials Engineering and Characterization for Battery Applications is designed to help solve fundamental and applied problems in the field of energy storage. Broken up into four separate sections, the book begins with a discussion of the fundamental electrochemical concepts in the field of energy storage. Other sections look at battery materials engineering such as cathodes, electrolytes, separators and anodes and review various battery characterization methods and their ap...

This book presents original, peer-reviewed research papers from the 2025 5th International Symposium on Insulation and Discharge Computation for Power Equipment (IDCOMPU2025), held in Harbin, China. The topics covered include, but are not limited to, insulation technologies, discharge computation methods, electric power equipment, and electrical materials. These papers showcase the latest advancements in the field of insulation and discharge analysis for power equipment, making the book a ...