Skip to main content

Kundvagn

Du får VIP-behandlingen!

Objekt inte tillgängliga för köp
Vänligen granska din kundvagn. Du kan ta bort objekt som inte är tillgängliga nu, eller så gör vi det automatiskt i kassan.
objektobjekt
objektobjekt

Rekommenderas för dig

Loading...

Dynamik E-böcker

Om du gillar Dynamik-e-böcker så kommer du att älska dessa toppval.
Visar 124 av 1148 resultat
Skip side bar filters
  • Advances in Asset Management and Condition Monitoring

    COMADEM 2019

    Redigerad av Andrew Ball, Len Gelman, B. K. N. Rao ...
    Serie serie Springer Nature Proceedings excluding Computer Science
    This book gathers select contributions from the 32nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2019), held at the University of Huddersfield, UK in September 2019, and jointly organized by the University of Huddersfield and COMADEM International. The aim of the Congress was to promote awareness of the rapidly emerging ... Läs mer

    3 353,80 kr

  • Iterative Learning Control for Flexible Structures

    Serie serie Intelligent Technologies and Robotics (R0)
    This book presents iterative learning control (ILC) to address practical issues of flexible structures. It is divided into four parts: Part I provides a general introduction to ILC and flexible structures, while Part II proposes various types of ILC for simple flexible structures to address issues such as vibration, input saturation, input dead-zone, input backlash, external disturbances, and ... Läs mer

    1 044,32 kr

  • Poisson Theory of Elastic Plates

    Serie serie Engineering (R0)
    This groundbreaking book resolves the main lacuna in Kirchhoff theory of bending of plates in the Poisson-Kirchhoff boundary conditions paradox through the introduction of auxiliary problem governing transverse stresses. The book highlights new primary bending problem which is formulated and analyzed by the application of developed Poisson theory. Analysis with prescribed transverse stresses along ... Läs mer

    1 044,32 kr

  • Rotating Machinery, Vibro-Acoustics & Laser Vibrometry, Volume 7

    Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics 2018

    Redigerad av Dario Di Maio ...
    Serie serie Springer Nature Proceedings excluding Computer Science
    Rotating Machinery, Vibro-Acoustics & Laser Vibrometry, Volume 7: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics, 2018, the seveth volume of nine from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Rotating Machinery, ... Läs mer

    2 773,56 kr

  • Essentials of Dynamics and Vibrations

    Serie serie Engineering (R0)
    This updated second edition brings the complex mathematics of three-dimensional dynamics to life with real-time simulations, making the equations easier to grasp. Covering core topics in mechanical engineering such as kinematics, dynamics, vibration analysis, gyroscopes, gears, and Euler’s equations, the book offers a clear and engaging approach for students, professionals, and enthusiasts alike. ... Läs mer

    986,30 kr

  • Esercizi di fisica per licei: cinematica, dinamica e statica

    In questo libro sono svolti degli esercizi riguardo i seguenti argomenti fisici: cinematicaforze statiche e dinamicheleggi di conservazioneteoria degli urti ... Läs mer

    39,74 kr

  • Analysis and Synthesis of Dynamic Systems with Positive Characteristics

    av Jun Shen ...
    Serie serie Engineering (R0)
    This thesis develops several systematic and unified approaches for analyzing dynamic systems with positive characteristics or a more general cone invariance property. Based on these analysis results, it uses linear programming tools to address static output feedback synthesis problems with a focus on optimal gain performances. Owing to their low computational complexity, the established controller ... Läs mer

    1 044,32 kr

  • Advances in Applied Nonlinear Dynamics, Vibration, and Control – 2024

    The Proceedings of 2024 International Conference on Applied Nonlinear Dynamics, Vibration and Control (ICANDVC2024)

    Serie serie Springer Nature Proceedings excluding Computer Science
    This book aims to provide readers with the latest exciting advancements in applied and interdisciplinary engineering science and technologies, particularly in nonlinear dynamics, vibration analysis and control, control systems theory and methods, robotics, and their various engineering applications developed in recent years. The chapters, contributed by active scholars in these fields, cover ... Läs mer

    3 469,85 kr

  • Lectures on Quantum Mechanics

    Volume 2: Simple Systems

    Note: *The three volumes are not sequential but rather independent of each other and largely self-contained.The reader of Simple Systems is not expected to be familiar with the material in Basic Matters, but should have the minimal knowledge of a standard brief introduction to quantum mechanics with its typical emphasis on one-dimensional position wave functions. The step to Dirac's more abstract ... Läs mer

    378,51 kr

  • Algebraic and Symbolic Computation Methods in Dynamical Systems

    Redigerad av Alban Quadrat, Eva Zerz ...
    Serie serie Mathematics and Statistics (R0)
    This book aims at reviewing recent progress in the direction of algebraic and symbolic computation methods for functional systems, e.g. ODE systems, differential time-delay equations, difference equations and integro-differential equations. In the nineties, modern algebraic theories were introduced in mathematical systems theory and in control theory. Combined with real algebraic geometry, which ... Läs mer

    1 044,32 kr

  • Recent Advances in Mechanisms, Transmissions and Applications

    Proceedings of the Fifth MeTrApp Conference 2019

    Serie serie Springer Nature Proceedings excluding Computer Science
    Gathering the proceedings of the conference MeTrApp 2019, this book covers topics such as mechanism and machinery design, parallel manipulators, robotics and mechatronics, control applications, mechanical transmissions, cam and gear mechanisms, and dynamics of machinery. MeTrApp 2019 provided researchers, scientists, industry experts, and graduate students from around the globe with a platform to ... Läs mer

    2 320,85 kr

  • Shock & Vibration, Aircraft/Aerospace, and Energy Harvesting, Volume 9

    Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015

    Redigerad av Alfred Wicks ...
    Serie serie Springer Nature Proceedings excluding Computer Science
    Shock & Vibration, Aircraft/Aerospace, Energy Harvesting, Volume 9: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015*,* the ninth volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Shock & Vibration, ... Läs mer

    1 624,56 kr

  • Computational Methods in Stochastic Dynamics

    Serie serie Engineering (R0)
    At the dawn of the 21st century, computational stochastic dynamics is an emerging research frontier. This book focuses on advanced computational methods and software tools which can highly assist in tackling complex problems in stochastic dynamic/seismic analysis and design of structures. The book is primarily intended for researchers and post-graduate students in the fields of computational ... Läs mer

    1 624,56 kr

  • Nonlinear Elasticity

    A Concise Masterclass for Undergraduates

    Serie serie Physics and Astronomy (R0)
    This textbook provides a rigorous yet accessible introduction to Nonlinear Elasticity aimed at undergraduate students in a compact text. Rooted in concepts from first- and second-year undergraduate Linear Algebra and Calculus (and very little Tensor Algebra), the book touches upon all the fundamental aspects of nonlinear elasticity, from the analysis of deformation and stress, to the constitutive ... Läs mer

    754,20 kr

  • Nonlinear Dynamics, Chaos, and Complexity

    In Memory of Professor Valentin Afraimovich

    Redigerad av Dimitri Volchenkov ...
    Serie serie Physics and Astronomy (R0)
    This book demonstrates how mathematical methods and techniques can be used in synergy and create a new way of looking at complex systems. It becomes clear nowadays that the standard (graph-based) network approach, in which observable events and transportation hubs are represented by nodes and relations between them are represented by edges, fails to describe the important properties of complex ... Läs mer

    986,30 kr

  • Maschinendynamik

    Serie serie Computer Science and Engineering (German Language)
    Maschinendynamik ist aktueller denn je: Dynamische Belastungen und störende Schwingungen (auch Schadensfälle) nehmen mit höheren Drehzahlen und weiterer Leichtbauweise zu. Der Arbeitsschutz verlangt fundierte Maßnahmen zur Schwingungs- und Lärmbekämpfung bei allen Maschinen und deren Baugruppen; andererseits lassen sich dynamische Effekte vorteilhaft ausnutzen, z.B. bei Zentrifugen und ... Läs mer

    433,67 kr

  • Proceedings of the TEPEN International Workshop on Fault Diagnostic and Prognostic

    TEPEN2024-IWFDP - Volume 2

    Serie serie Springer Nature Proceedings excluding Computer Science
    This book gathers the latest advances, innovations, and applications in the field of efficiency and performance engineering, as presented by leading international researchers and engineers at the TEPEN International Workshop on Fault Diagnostics and Prognostics (TEPEN-IWFDP), held in Qingdao, China, on May 8–11, 2024. Topics include machine and structural health monitoring, non-destructive testing ... Läs mer

    3 469,85 kr

  • Time Delay Systems

    Theory, Numerics, Applications, and Experiments

    Serie serie Engineering (R0)
    This volume collects contributions related to selected presentations from the 12th IFAC Workshop on Time Delay Systems, Ann Arbor, June 28-30, 2015. The included papers present novel techniques and new results of delayed dynamical systems. The topical spectrum covers control theory, numerical analysis, engineering and biological applications as well as experiments and case studies. The target ... Läs mer

    1 044,32 kr

  • Recent Asian Research on Thermal and Fluid Sciences

    Proceedings of AJWTF7 2018

    Serie serie Springer Nature Proceedings excluding Computer Science
    This book presents a collection of the best papers from the Seventh Asian Joint Workshop on Thermophysics and Fluid Science (AJWTF7 2018), which was held in Trivandrum, India, in November 2018. The papers highlight research outputs from India, China, Japan, Korea and Bangladesh, and many of them report on collaborative efforts by researchers from these countries. The topics covered include Aero ... Läs mer

    1 624,56 kr

  • Satellite Formation Flying

    High Precision Guidance using Optimal and Adaptive Control Techniques

    Serie serie Engineering (R0)
    Small satellite technology is opening up a new era in space exploration offering reduced cost of launch and maintenance, operational flexibility with on-orbit reconfiguration, redundancy etc. The true power of such missions can be harnessed only from close and precise formation flying of satellites. Formation flying missions support diverse application areas such as reconnaissance, remote sensing, ... Läs mer

    1 740,61 kr

  • Control Systems

    Classical, Modern, and AI-Based Approaches

    Control Systems: Classical, Modern, and AI-Based Approaches provides a broad and comprehensive study of the principles, mathematics, and applications for those studying basic control in mechanical, electrical, aerospace, and other engineering disciplines. The text builds a strong mathematical foundation of control theory of linear, nonlinear, optimal, model predictive, robust, digital, and ... Läs mer

    2 085,73 kr

  • Vibration

    Fundamentals and Practice, Second Edition

    Maintaining the outstanding features and practical approach that led the bestselling first edition to become a standard textbook in engineering classrooms worldwide, Clarence de Silva's Vibration: Fundamentals and Practice, Second Edition remains a solid instructional tool for modeling, analyzing, simulating, measuring, monitoring, testing, controlling, and designing for vibration in engineering ... Läs mer

    2 366,52 kr

  • Ultrasonic Nano/Microfabrication, Handling, and Driving

    av Junhui Hu ...
    Serie serie Emerging Materials and Technologies
    Ultrasonic nano/microfabrication, handling and driving is an emerging actuation technology, which utilizes ultrasonic vibration and the physical effects of ultrasonic vibration in fluids and solids to implement the fabrication, handling and driving of nano/micro scale objects. This book provides readers with the fundamentals, principles and characteristics of the ultrasonic devices for nano/micro ... Läs mer

    775,38 kr

  • Fundamentals of Structural Mechanics, Dynamics, and Stability

    av A.I. Rusakov ...
    Fundamentals of Structural Mechanics, Dynamics, and Stability examines structural mechanics from a foundational point of view and allows students to use logical inference and creative reasoning to solve problems versus rote memorization. It presents underlying theory and emphasizes the relevant mathematical concepts as related to structural mechanics in each chapter. Problems, examples, and case ... Läs mer

    949,20 kr